CBWZC - THALLIUM IN HNO*3, 1000UG/ML

  • MSDS: CBWZC
  • Manufacturer: PLASMA CHEM ASSOCIATES INC
  • Product Name: THALLIUM IN HNO*3, 1000UG/ML
  • National Stock Number: 6550-00N068229
Product Identification

Product ID:THALLIUM IN HNO*3, 1000UG/ML
MSDS Date:11/01/1994
FSC:6550
NIIN:00N068229
MSDS Number: CBWZC

Responsible Party
PLASMA-CHEM ASSOCIATES INC
5142 W HURLEY POND RD
FARMINGDALE, NJ 07727
US

Emergency Phone: 908-919-0509

Info Phone: 908-919-0509

Cage: 0L438

Contractor
PLASMA-CHEM ASSOCIATES INC
FARMINGDALE, NJ 07727 US

Telephone: 908-919-0509

Cage: 0L438

Ingredients

1); (THALLIUM NITRATE) (SARA 313)

CAS: 10102-45-1

RTECS: XG5950000

Fraction By Weight: 0.1-1.0%

OSHA PEL S, 0.1 MG(TL)/M3

ACGIH TLV: S, 0.1 MG(TL)/M3

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


NITRIC ACID (SARA 302/313) (CERCLA)

CAS: 7697-37-2

RTECS: QU5775000

Fraction By Weight: 2-5%

OSHA PEL 2 PPM

ACGIH TLV: 2 PPM/4 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 98-99%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BURNS, COUGHING, IRRITATION, NAUSEA,
VOMITING, LABORED BREATHING. CHRONIC:NOT APPLICABLE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE.

First Aid

First Aid:SEEK MEDICAL ASSISTANCE FOR FURTHER TREATMENT, OBSERVATION
AND SUPPORT IF NECESSARY. EYE:FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN:FLUSH WITH WATER FOR 15 MINUTES. WASH CONTAMINATED
CLOTHING BEFO RE RE-USE. INHALATION:REMOVE TO FRESH AIR.
INGESTION:DO NOT INDUCE VOMITING. GIVE COPIOUS AMOUNTS OF WATER OR
MILK.

Fire Fighting

Extinguishing Media:WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:TAKE UP WITH INERT, ABSORBENT MATERIAL.
CONTAINERIZE FOR DISPOSAL. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A CORROSION FREE AREA. KEEP
CONTAINER SEALED.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . LAB COAT OR APRON.
Work Hygienic Practices:USUAL.
Supplemental Safety and Health
EYE PROT:AND FULL LENGTH FACE SHIELD .

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1 (H*2O=1)
Evaporation Rate & Reference:1 (WATER=1)
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR, COLORLESS, ODORLESS SOLUTION.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG BASES OR STRONG REDUCING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT OR COLD.
Hazardous Decomposition Products:NO*X.

Disposal

Waste Disposal Methods:CORROSIVE WASTE IN ACCORDANCE WITH ALL FEDERAL,
STATE AND LOCAL ENVIRONMENTAL REUGLATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.